Dual mode · LED + LD
150 LUX
IPX5 sealed
USB rechargeable
01Night system
A safety zone the road cannot ignore
After dark you are not sharing the road so much as negotiating for it, with drivers who are tired, distracted and still moving fast. This light answers in two languages at once: five lensed beads that make you present, and a laser frame laid on the asphalt that reads like lane markings.
150LUX rated output
5LED beads
IPX5Sealed shell
02The dark hour
Three seconds of being unseen is the whole risk
A tail light is one point of red in a sea of brake lights. From forty metres back it reads as streetlamp glow, so the car behind keeps closing until the gap is already gone.
-
01
Swallowed by low lightA dot of red disappears against the clutter of a city street.
-
02
Squeezed by passing trafficNothing on the ground tells a driver where your line is about to end.
-
03
Blurred by weatherRain, spray and fog smear a small light into nothing at all.
03Side by side
One point of light, or a boundary on the ground
What separates the two is not brightness, it is area. A wider, lower, geometric signal is registered by the eye sooner, and it tells the driver behind exactly where you intend to be.
Signal shape
A single red dot
A frame around your line
Read at distance
Late, at the last metre
Early, from the far lane
Ground cue
None
Lane edge, drawn in red
Wet night
Washes out in spray
Stays legible on wet tarmac
04Projected lane
You do not ask for room. You draw it
A dedicated LD module throws a red frame onto the asphalt behind and beside the bike, roughly the width of a rider's line. Drivers register a marked boundary before they register a person, and marked boundaries get respected.
LD module
Red frame on asphalt
Driver reads a lane
05Output
Bright enough to interrupt a distracted driver
Five lensed beads push a rated 150 LUX through a faceted red diffuser, so the glow spreads rather than points. It stays readable from the side, from a low angle, and through the tinted glass of the car behind you.
150LUX
EmitterFive-bead LED array
ModesLED + LD, dual setting
06Hardware
Built for grit, not for a display case
Every joint on a rear light is a place water can find. Ours are sealed, and the parts that take the daily abuse — lens, shell, strap — were chosen before anything else.
HousingPolycarbonate with sealed seams
StrapSilicone, tool-free fit
ChargingUSB, cable included
LensFaceted red diffuser
07Weather
Rain is the test it was built to pass
IPX5 keeps the internals dry against direct spray and road wash, and the polycarbonate body shrugs off the knocks that come from mounting and re-mounting a light every single day.
08Where it works
One setting, from the commute to the empty road
One mode for the lit arterial, one for the unlit trail. Nothing to configure at the roadside, because the light behaves the same whether you are in a group of six or alone at midnight.
-
Evening commute through moving traffic
-
Unlit trail, towpath and back road
-
Group rides, wet or dry
-
Fog, spray and low visibility
09Details
Everything measured, nothing padded
Size11.4 × 6.5 × 3.7 cm (4.5 × 2.6 × 1.5 in)
Brightness150 LUX
MountSilicone strap
ModesLED / LD
ChargingUSB charging
WaterproofIPX5
In the boxTail light, silicone mount, charging cable
Ride the night like you own a lane in it
Five LED beads · one LD projector · IPX5 sealed shell