Rechargeable Electric Lint Remover with Smart Digital Display 🧶
Rechargeable Electric Lint Remover with Smart Digital Display 🧶
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Rechargeable Electric Lint Remover with Smart Digital Display 🧶
GLOBAL DELIVERY
Worldwide Shipping
Fast dispatch with tracking updates
READY TO SHIP
24–48HPrecision Fabric Care
Your wardrobe's
quiet reset.
A rechargeable lint remover with a live 99% battery readout, two motor speeds and a hardened steel guard — built to lift fuzz without touching the fiber.
- 99% live readout
- Gentle + Strong
- 800 mAh · Type-C
Gloss white body · digital display live at 99%
The Problem
Friction ages fabric
faster than wear.
Every wash cycle rubs fibers together until loose ends knot into pills. Snagging blades and warped meshes then pull the loop apart — so the garment gets cleaner and thinner at the same time.
- Pilling flattens the nap of wool and knits
- Blunt or warped blades catch and tear loops
- Pet hair and lint settle deep into the weave
Stubborn pills · snagging · pet hair · warped guards
01 — Dual-Speed Motor
Gentle for cashmere.
Strong for coats.
One button moves between two torque curves: a low-vibration pass that skims surface fuzz from fine gauge knits, and a high-torque pass that clears felted pilling from heavy wool, coats and upholstery.
- Strong — dense pilling on coats, felt and sofas
- Gentle — cashmere, merino and fine sweaters
- Switch — mid-garment, with a single press
Sage finish · gentle pass on a wool crewneck
02 — Sealed Suction
Loose fuzz,
gone in one pass.
A dual-flow intake keeps negative pressure constant across the whole head, so loose fuzz is pulled into the cutter instead of pushed across the surface. No second pass, no scratched nap.
- Constant suction across the whole head
- Fuzz collected in the built-in chamber, not on your lap
- Fabric returns smooth — not brushed or shaved
White finish · fuzz lifted, knit left intact
03 — Fabric Guard
A mesh that
refuses to warp.
Traditional guards bend under hand pressure and let fiber loops reach the blade. Our 0.35 mm stainless shield holds its shape, so the cutter meets fuzz — and stops there.
- 0.35 mm hardened stainless steel shield
- Stays flat under full hand pressure
- Tested on wool, felt and looped knit
Warped guard vs. thickened shield · same hand pressure
04 — Inside the Head
Four parts doing
the work of a tailor.
Nothing decorative. Every component inside the head exists to separate fuzz from fiber in a single pass.
Head assembly · cutter, shield, impeller, charging port
05 — Three Steps
Sixty seconds,
start to finish.
Lay the garment flat, choose a speed, and roll. The digital display shows remaining battery the whole way, so you never stall halfway through a coat.
-
01
Choose the speed. Gentle for fine knits, strong for dense pilling.
-
02
Glide over the surface. Let the suction work — no downward pressure.
-
03
Roll away the lint. Empty the collector, store the unit upright.
Select · glide · roll
Keep It Sharp
Three habits,
years of clean fabric.
Clean the blade after every use — fuzz left in the head dulls the cutter.
Store it cool and dry, away from direct sunlight and damp closets.
Never immerse the main unit. Wipe the body, brush the head, air dry.
In the box — 1 × rechargeable electric lint remover with digital display
Two Finishes
White, or soft sage.
Same head, same 190 g body, same live battery readout. Pick the finish that suits your shelf — both charge over USB-C in the same time.
Gloss shell · chrome collar
Soft matte shell · chrome collar
Choose White or Green in the options above.
